User's Manual

10 INSTALLATION INSTRUCTIONS
Figure 4 - Installation cut-outs
C
B
D min
A min
INSTALLATION INSTRUCTIONS
MODEL CODE
DIMENSION (MM)
GAS SUPPLY LOCATION
(LEFT OR RIGHT)
A B C D
WHG644SC 144 560 490 145 Left
WHG648SC 152 560 490 145 Left
WHG643SC 144 560 490 145 Left
WHG645SC 144 560 490 145 Left
WHG645WC 144 560 490 145 Left
WHG758SC 126 710 490 145 Left
WHG954SC 132 860 490 145 Left
WHG958SC 140 860 490 145 Left
WHG953SC 132 860 490 145 Left
WHG955SC 132 860 490 145 Left
WHG955WC 132 860 490 145 Left
WHG638BC 153 560 490 145 Left
WHG958BC 137 860 490 145 Left
This appliance must be installed by an authorised person
and in compliance with:
1. AS/NZS 5601.1 Gas Installations Part 1: General
Installations, and AS/NZS 5601.2 Gas Installations
Part 2: LP Gas installations in caravans and boats for
non-propulsive purposes, or the relevant installation
code for gas appliances in your country.
2. The local gas fitting regulations, municipal building
codes, electrical wiring regulations and any other
relevant statutory regulations.
3. The particular instructions as given below.
WARNING
CAUTION
Cooktops are supplied for use with natural gas (NG).
To use with LPG the injectors MUST be changed using
the conversion kit supplied. Refer LP Conversion on page
12 and 13.
4. A certificate of compliance MUST be given to the
customer after the appliance is successfully installed.
5. This appliance must be earthed.
NOTE: Distances shown to adjacent
walls/surfaces are for the distance to
a combustible surface. If the surface
is not combustible the measurement
can be smaller than that shown.