Product Manual

14 | Westinghouse Outdoor Power Equipment
1
2
3
4
5
OPERATION
STOPPING THE PRESSURE WASHER
Normal Operation
During normal operation, use the following steps to
stop your pressure washer:
1. Lock the spray gun trigger lock in the OFF position.
2. Move the engine OFF/ON switch to the OFF
position.
WPX2600/2800
Switch
WPX3100
Switch
3. Close the fuel shuto valve (WPX3100 Only).
4. Turn the water supply o.
5. Unlock the spray gun trigger and squeeze the
trigger to release any pressure in the hoses and
pump.
6. Disconnect the garden hose from the water inlet.
7. Complete all steps in After Each Use in
Maintenance section of manual.
During an Emergency
If there is an emergency and the pressure washer must
be stopped quickly, push the engine control switch to
OFF position immediately.
SELECTING NOZZLES
The quick-connect feature allows changing between
nozzles while the pressure washer is running once the
spray gun trigger is locked in the safe position.
NOTICE
Only use the nozzles that were supplied with the
pressure washers. Using any other nozzles can
aect performance and may void the warranty.
For replacement nozzles call [phone].
WARNING
Always apply the trigger lock to change a
nozzle if the engine is running.
High Pressure 0° (RED)
High to Medium Pressure 15° (YELLOW)
Medium Pressure 25° (GREEN)
Low Pressure 40° (WHITE)
Soap (BLACK)