Product Manual

16 | Westinghouse Outdoor Power Equipment
OPERATION
MAINTENANCE
RINSING
WARNING
Always apply the trigger lock to change a
nozzle if the engine is running
1. Select the desired nozzle and change nozzle.
2. Squeeze the trigger and carefully start to spray,
keeping nozzle at a safe distance from the cleaning
surface.
3. Starting from the top of the surface, spray a small
are then check surface for damage. If no damage,
continue rinsing by using overlapping strokes
working down the surface. Keep checking surface
for damage while rinsing.
CLEANING SOAP SIPHON HOSE
If used, clean the soap siphon hose before
stopping the engine.
1. If necessary, install the soap nozzle (BLACK).
2. Use clean water to ush the soap siphon hose.
Submerge the soap siphon hose in clean water.
3. Flush the soap siphon hose for 1 - 2 minutes while
the engine is running.
4. Once clean, stop the engine.
5. Point spray gun in a safe direction. Squeeze the
trigger to release pressure within the system.
MAINTENANCE
BEFORE ASSEMBLING THE PRESSURE
WASHER REVIEW THE SAFETY
SECTION STARTING ON PAGE 5.
WARNING
Avoid accidentally starting the pressure
washer during maintenance by removing
the spark plug boot from the spark plug.
Allow hot components to cool to
the touch prior to performing any
maintenance procedure.
Internal pressure can build in the engine
crankcase while the engine is running.
Removing the oil ll plug/dipstick while
the engine is hot can cause extremely hot
oil to spray out of the crankcase and can
severely burn skin. Allow engine oil to
cool for several minutes before removing
the oil ll plug/dipstick.
Always perform maintenance in a well
ventilated area. Gasoline fuel and fuel
vapors are extremely ammable and can
ignite under certain conditions.
CAUTION
Avoid skin contact with engine oil or
gasoline. Prolonged skin contact with
engine oil or gasoline can be harmful.
Frequent and prolonged contact with
engine oil may cause skin cancer. Take
protective measures and wear protec-
tive clothing and equipment. Wash all
exposed skin with soap and water.
WARNING
Failure to perform periodic maintenance
or not following maintenance procedures
can cause the pressure washer to
malfunction and could result in death or
serious injury.
NOTICE
Periodic maintenance intervals vary depending on
pressure washer operating conditions. Operating the
pressure washer under severe conditions, such as
sustained high-load, high-temperature, or unusually
wet or dusty environments, will require more frequent
periodic maintenance. The intervals listed in the
maintenance schedule should be treated only as a
general guideline.