User Manual

If the position your fridge occupies would be better

suited to a reverse opening arrangement, carefully follow

these diagrams and instructions. The reversing of doors

or replacement of light bulbs is not covered by warranty.

Tools you will need:

• 8mm socket driver

• Cross-shaped screwdriver

• Putty knife or thin-blade screwdriver

• 3mm allen key

Precautions

• Turn off the appliance

• Unplug the power cable

1. Remove the hinge cover and the block cover from the

refrigerator body, then remove the cover plate from the

door. Using the 8mm wrench, remove the special flange

self tapping screws and the hinge.

Note: Please hold on to the refrigerator door to prevent

door dropping.

Hinge cover

Block cover

Cover plate

Special flange self tapping screw

Upper hinge

2. Remove the door and place it carefully on a smooth

surface with the door panel facing upwards.

3. Using the 8mm wrench, unscrew and remove the

hinge axis.

hinge

axis

4. Flip the upper hinge over as shown below.

5. Replace the hinge axis and washer.

6. Gently lever off the handle covers and remove the

screws. Remove the handle and set beside the

refrigerator door.

handle

covers

screws

handle

7. Remove the screw hole covers from the opposite side

of the door and use them to cover the holes left by

the removed screws.

screw hole

covers

screw hole

covers

REVERSING THE DOOR