Dimension Sheet

Dimension and installation guide
© 2020 Electrolux Home Products Pty Ltd. ABN 51 004 762 341. WDIM_Aspire_Apr20
IMPORTANT
These dimensions are a guide only. All measurements are in millimetres (mm).
For complete installation instructions, refer to the manual provided with product.
westinghouse.com.au
DIMENSIONS ARE IN MILLIMETRES
INSTALLING THE COOKER HOOD
COMPONENTS LIST
COMPONENTS NOT INCLUDED
 1 body assembly with grease filters
(900-3grease filters / 600-2 grease filters)





1 telescopic flue cover set
2 cover flue mounting brackets
1 instruction book
1 plastic bag containing screws for fixing
telescopic flue covers
1 plastic duct transition: oblong to round
 Fixings required to attach cover flue mounting
brackets to wall.
 Fixings required to attach the cooker hood to
wall.
Remove polystyrene packaging from inside
top of canopy body and behind fan motor.
(Diagrams C and D)
Before installing the cooker hood, peel off any
protective plastic covering.
NOTE:
Some installations may require
telescopic flue cover cut to length.
Cut with tin snips or a fine-tooth
hack saw blade, taking care not to
distort or dent flue cover.
Diagram B:
 Recommended working heights.
 Cover flue mounting bracket locations.
 Telescopic cover flue fixing points.
203203
(600 model)
(600 model)
C
L
Hood base
Top of hob
MINIMUM:
600 electric
650 gas
MAXIMUM:
800 mm
245
75
75
65 65
38
303
303
600 models as per this diagram with these dimensions the only variables
490
B
A
222
165
230
500
600/900
20
max)
1240
(
540
470(max)
C
D
DIMENSIONS ARE IN MILLIMETRES
INSTALLING THE COOKER HOOD
COMPONENTS LIST
COMPONENTS NOT INCLUDED
 1 body assembly with grease filters
(900-3grease filters / 600-2 grease filters)





1 telescopic flue cover set
2 cover flue mounting brackets
1 instruction book
1 plastic bag containing screws for fixing
telescopic flue covers
1 plastic duct transition: oblong to round
 Fixings required to attach cover flue mounting
brackets to wall.
 Fixings required to attach the cooker hood to
wall.
Remove polystyrene packaging from inside
top of canopy body and behind fan motor.
(Diagrams C and D)
Before installing the cooker hood, peel off any
protective plastic covering.
NOTE:
Some installations may require
telescopic flue cover cut to length.
Cut with tin snips or a fine-tooth
hack saw blade, taking care not to
distort or dent flue cover.
Diagram B:
 Recommended working heights.
 Cover flue mounting bracket locations.
 Telescopic cover flue fixing points.
203203
(600 model)
(600 model)
C
L
Hood base
Top of hob
MINIMUM:
600 electric
650 gas
MAXIMUM:
800 mm
245
75
75
65 65
38
303
303
600 models as per this diagram with these dimensions the only variables
490
B
A
222
165
230
500
600/900
20
max)
1240
(
540
470(max)
C
D
Canopy rangehood
WRF900CS
Product WxHxD (mm) 900 x (770-1240) x 500
Duct, diameter (mm) top only, 125