User Manual

4
INSTALLATION
Standard ducting installation
It is recommended that the unit be positioned at a
minimum of 600mm for an electric cooktop and 650mm
for a gas cooktop, and no further from the cooktop than
800mm. Then unit becomes less effective as the distance
from the cooking surface to the rangehood increase.
650
GAS
ELECTRIC
600
Fixing point dimensions – 600mm
Fixing point dimensions – 900mm
WARNING!
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Ducting installation
When installing with ducting pipe the Duct spigot must
be fitted to the ducting hole on top of the body of the
rangehood.
Duct Spigot
Recirculating installation
(For Models: WRH608I* WRR614*A WRH908I* WRR
604*B WRR904*B WRR614*B WRR914*B)
When installed in recirculating mode the ducting hole
cover must be fitted.
Ducting hole cover
Parts supplied with hood
1 × Duct Spigot
1 x Ducting hole cover (for WRH608I* WRR614*A
WRH908I* WRR604*B WRR904*B WRR614*B
WRR914*B)
4 × M6 × 40 screws
4 × Ø6 washers
2 × Carbon filters (for WRR614*A WRR614*B WRR
914*B)
Parts to be purchased
• Aluminium tape or cable ties to secure flue pipe
• Custom drawer fascia (if required)
• Ducting accessories
Minimum cabinet opening, 600mm
Minimum cabinet opening, 900mm
470
598
210
280
158
175
20
42
121
ø
550
34
770
898
210
20
280
158
42
175
34
850
121
ø