WRR604SB 60cm slide out stainless steel rangehood with 2 fans, 3 speeds and top re-circulating option. RRP AUS $249.
WRR604SB Product Details FEATURES 340m3/hr extraction rate LED lighting Slimline design suitable for integration Removable front fascia Front fascia panel of rangehood can be removed and exchanged with a trim to integrate into the kitchen colour scheme 3 speed fan Dishwasher safe mesh filters BENEFITS Clear the air quickly Our rangehoods offer powerful extraction rates ensuring your kitchen is clear of cooking odours, vapours and excess heat in no time at all.
WRR604SB Specifications PRODUCT PROFILE MOTOR/FAN Domestic warranty details (yrs) 2 Type of Rangehood slide out Nominal width 600 Finish of Rangehood stainless steel,grey DIMENSIONS Number of fans 2 Number of fans speeds 3 Type of motor centrifugal Perimeter extraction No Maximum airflow M3/Hr 340 Noise level dB high 66 Noise level dB low 57 Number of motors 2 Wattage of motor 125 POWER Total product height (mm) 175 Total product width (mm) 598 Total product depth (mm) 30
WRR604SB DIMENSIONS Diameter of ducting (mm) 120 Minimum installation height from cooking surface Gas (mm) 650 Minimum installation height from cooking surface Electric (mm) 600 CONTROLS FILTERS Control panel auto activated pull/push) Number of filters 2 Safety/ display indicators automatic safety cut off Type of filter multilayer aluminum micromesh filters Dishwasher safe Yes LIGHTS DUCTING / RECIRCULATION Number of lights 2 Ducting optional accessory Wattage of light 5.
WRR604SB DUCTING / RECIRCULATION SHIPPING Type of filter Charcoal Filter Optional Number of optional filters required two STUFFING QUANTITIES Shipping Volume (m3) 0.058 20ft 459 Shipping Weight (Kg) 12.1 40ft 972 Product Weight (Kg) 9.
WRR604SB Terms and Conditions IMPORTANT This is a guide of product dimensions only. For complete installation instructions, refer to the manual provided with product. PRODUCT INFORMATION The descriptors and illustrations in this publication apply to the specific products and models described as at the date of issue. Under our policy of continuous productdevelopment, product specifications may change without notice.