User Manual

PREPARING FOR USE
PREPARING FOR USE
W
ARNING
CAUTION
Solubility of the tablet detergents produced by different
companies can vary depending on the temperature
and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use
powder detergents in such programs.
Should any problem, which you have not encountered
before, arise with the use of this type of detergents,
contact the detergent manufacturers directly.
When you give up using combined detergents
Fill the rinse aid compartment.
Set the suitable rinse aid setting.
Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap.
Fill the compartment with rinse aid until MAX level
and then close the cap
.
Be careful not to overfill the rinse aid compartment
and wipe up any spills
.
In order to set rinse aid level, follow below steps:
ARNING
CAUTION
Use only those rinse aid materials which are allowed for
use in the machine. As rinse aid residues left as a result of
overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the
excess amount of rinse aid by wiping it with a paper towel
or cloth.
RINSE-AID
15
Turn on the machine by pressing On/
Off button.
Press Program button at least for 5”
immediately after machine is turned
on.
Release Program button when “rA” is
shown. Rinse aid level setting follows
water hardness level setting. Next, the
last setting level is viewed.
Set the level by pushing the program
button.
Switch off the machine to save the
setting.
The factory setting is “4”.
If the dishes are not drying properly or
are spotted, increase the level. If blue
stains form on your dishes, decrease level.
Level Brightener Dose Indicator
1 Rinse-aid not
dispensed
r1 is shown on the
display.
2 1 dose is dispensed r2 is shown on the
display.
3 2 doses are
dispensed
r3 is shown on the
display.
4 3 doses are
dispensed
r4 is shown on the
display.
5 4 doses are
dispensed
r5 is shown on the
display.