User's Manual

8
CONTROL DESCRIPTIONS
NOTE: Child lock is activated/deac-
tivated by pressing the select button (5)
for about 3 seconds. When it is activated,
all leds blink and “CL” is shown on the Re
NOTE: If you switch the machine to
off position after selecting the delay time
and the program has started, the dela-
yed time is cancelled.
Changing a program
If you would like to change the program
when the machine is already running.
Press the Start/
Pause button.
After the program stops, select
your desired program via the
program selection button.
Start the newly selected
program by pressing
the Start/Pause button.
The new program will
resume the course of
the old program.
Cancelling a program
If you would like to cancel a program
when it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the
End light blinks.
The machine discharges
the water inside it in
When the End light turns on,
switch your machine off by
pressing the On/Off button.
Switching the Machine Off
Pull the plug out of the outlet. Turn
off the water tap.
Switch your machine off with the On/Off
button after the program has ended and
the End light turns on.
NOTE: Do not open the door before
the program ends.
NOTE: At the end of washing prog-
ram, you can leave the door of your
machine ajar to hasten the drying.
NOTE: If the door of machine is ope-
ned or power is cut off during washing,
the program will continue when the door
is closed or the power is restored.
CONTROL PANEL