WWF7524N3WA Washing Machine User Manual 2
www.westinghouse.co.nz IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER’S WARRANTY Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Westinghouse manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
4. BEFORE FIRST USE ....................................................................................................... 16 5. DAILY USE 5.1 Loading The Laundry.................................................................................................... 17 5.2 Using Detergent And Additives .................................................................................... 17 5.3 Options Setting ....................................................................................................
4 1. www.electrolux.co.th www.westinghouse.co.nz SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: ● ● ● ● ● staff kitchen areas in shops, offices and other working environtment; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfast type environtments; areas for communal use in blocks of flats or in launderettes.
ENGLISH 5 5 1.2 Child Safety ● This washing machine is not intended for use by young children or infirm persons without supervision. ● Young children should be supervised to ensure that they do not play with the appliance. ● The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach. ● Keep all detergents in a safe place out of children’s reach. Make sure that children or pets do not climb into the drum.
6 www.electrolux.co.th www.westinghouse.co.nz 1.3 General Safety 1.4 Installation ● It is dangerous to alter the specifica- ● This appliance is heavy. Care should tions or attempt to modify this product in any way. ● During high temperature wash program the door glass may get hot. Do not touch it! ● Make sure that small pets do not climb into the drum. To avoid this, please check inside the drum before using the appliance.
ENGLISH 1.5 Use ● Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. ● Do not overload the appliance. See the relevant section in the user manual. ● Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. ● Garments which have been in contact with volatile petroleum products should not be machine washed.
www.westinghouse.co.nz 2. PRODUCT DESCRIPTION 2.
Detergent/Softener Dispenser (For more informations, see page 17, 24) Transit Bolt (when remove) Main Wash Prewash Softener Door (when open) (for more informations, see page 17) Drum Lifter Stainless Steel Washing Drum Transit bolts must be removed before using the appliance. 2.2 Accessories Plastic Caps To close the holes on the rear side of the cabinet after the removal of the transit bolts.
www.westinghouse.co.nz 3. CONTROL PANEL 3.
3.2 Program Chart Program; Temperature range Max. Max. Load Spin (Dry Speed Clothes) Off Type of load and soil level This position to reset program/switching off the machine. - - Cotton; Cold to 90°C 1200 rpm 7.5 kg White and coloured cotton. (Adjust wash time according to soil level. See Time Saver table on page 13) Eco Cotton; 40°C1) and 60°C 1200 rpm 7.5 kg White and colourfast cotton. Set this program to have a good washing results and decrease the energy consumption.
www.westinghouse.co.nz Program; Temperature range Full Wash 60; 30°C to 60°C Max. Max. Load Spin (Dry Speed Clothes) 1200 rpm 7.5 kg Type of load and soil level Daily wear coloured cotton clothes such as shirts, blouses, towels and undergarments. Ideal for normal level of soil. 1) Eco Cotton Program with 40degC option selected is recommended for a full load of normally soiled cotton and is the Energy and Water rating label program.
3.4 Options Delay End ( Temperature Touchpad Press this touchpad repeatedly to increase or decrease the wash temperature if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. (Symbol “ ” corresponds to cold wash) Spin Selection Touchpad Press this touchpad repeatedly to increase or decrease the spin speed or select Rinse Hold, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
www.westinghouse.co.nz Prewash ( ) Touchpad Select this option if you wish your laundry to be pre-washed before the main wash. Use this option for heavy soil. The indicator of this option will be on. When you set this function, put the detergent into the “ ” compartment. This function increases the program duration. Easy Iron Touchpad When selecting this option the laundry is gently washed and spun to avoid creasing. In this way ironing is easier. The indicator of this option comes on.
3.5 Settings Child Safety Lock ( ) Option Your appliance is provided with CHILD SAFETY LOCK which permits you to leave the appliance unsupervised with the door closed without having to worry that children might be injured by or cause damage to the appliance. Set this option after pressing the Start/Pause touchpad. To set “Child Lock” option: ● To activate the function, press and hold “Extra Rinse” and “Delay End” touchpad about 2 seconds until the display shows the icon “ ”.
www.westinghouse.co.nz 3.6 Start/Pause ( ) and Add Clothes ( ) Touchpad This touchpad has 2 functions: 1. Start/Pause ( ) After you have selected the desired program and options, press this touchpad to start the machine. The Start/Pause pilot light will stop flashing and remain lit until the water level is above the bottom edge of the door then pilot light goes OFF. If you have selected a “Delay End” option, the countdown will begin and will be shown on the display. 2.
ENGLISH 17 17 5. DAILY USE 5.1 Loading The Laundry 1. Turn the water tap on. 5.2 Using Detergent And Additives Please read “Detergents Type and Quantity of Detergent”on page 22 before use. 2. Connect the main plug to the main socket. 3. Turn the knob to set a program. The washing machine will propose a temperature and automatically select the spin value provided for the program you have chosen. 1. Detergent Dispenser Drawer The detergent dispenser is divided into three compartments.
www.westinghouse.co.nz NOTE: When you use the liquid detergent - Do not use gelatinous or thick liquid detergents. - Do not put more liquid than the maximum level. - Do not set the “Prewash” phase. - Do not set the “Delay End”. 2. Measure out the detergent and the fabric softener; - Pull out the dispenser drawer until it stops. - Measure out the amount of detergent required, pour it into the main wash compartment . - If you wish to carry out the “Prewash” phase, pour it into the compartment marked .
5.4 Starting A Cycle ( ) 5.7 Changing The Options To start a program, press the Start/Pause touchpad. The corresponding pilot light will stop flashing and a default program duration will be displayed on the screen. After approx. 15 minutes from the start of a program: - The appliance will automatically adjust the selected program duration according to the type and size of the load. - The display will show adjusted program duration.
www.westinghouse.co.nz NOTE NOTE At the end of the program, the time remaining can suddenly decrease from 7 minutes or less to 0 due to the overestimated total program time during the load sensing phase. In some cases (with perfectly balanced load) the program time can be shorter than the time estimated after the load sensing phase is completed. This is a normal behavior of the machine and not a cause for concern as it does not compromise its performance. 5.
6. WASHING HINTS 6.1 Sorting The Laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.2 Temperatures Temp Soil level 90°C For normally soiled white cottons and linen (e.g. teacloths, towels, tablecloths, sheets...). 60°C For normally soiled, colourfast 50°C garments (e.g. shirts, night dresses, pajamas....
www.westinghouse.co.nz Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used in cold water.
Not enough detergent causes: the washload to turn grey, greasy clothes. Too much detergent causes: sudsing, reduced washing effect, inadequate rinsing. Use less detergent if: you are washing a small load, the laundry is lightly soiled, large amounts of foam during washing. 7. INTERNATIONAL WASH CODE SYMBOLS These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max.
www.westinghouse.co.nz 8. CARE AND CLEANING WARNING! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. 8.1 External Cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. 8.2 Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Flush it out under a tap to remove any traces of accumulated powder. 8.7 Cleaning The Water Inlet Filter If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. To clean the water inlet filters: 1. Close the water tap. 2. Remove the water inlet hose from the water tap. 3. Clean the filter in the inlet hose with a stiff brush. 4. Remove the inlet hose behind the appliance. 8.
www.westinghouse.co.nz 5. Clean the filter in the valve with a stiff brush or a towel. 8.8 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain 1. Disconnect the main plug from the main socket. Turn off the water tap. 2. Remove the water inlet hose. 6. Install the inlet hose again. Make sure that the couplings are tight to prevent leakages. 7. Open the water tap.
9. TROUBLESHOOTING 9.1 Possible Failures Alarm Code: Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please check troubleshooting below. Once the problem has been eliminated, press the Start/Pause button to restart the program. If after all checks, the problem persists, contact your local Service Centre. WARNING! Deactivate the appliance before you do the checks.
www.westinghouse.co.nz Malfunction Machine does not empty and/or does not spin: There is water on the floor: Unsatisfactory washing results: The door will not open: Machine vibrates or is noisy: Possible cause Solution The drain hose is squashed or kinked. (Error code: ) Check the drain hose connection. The drain pump is clogged. (Error code: ) Clean the drain filter. The option “Rinse Hold” has been selected. Press Start/Pause touchpad to drain the water or select spin program.
ENGLISH Malfunction Machine vibrates or is noisy: Cycle time longer than displayed: The cycle is shorter than the time displayed. Spinning starts late or machine does not spin: Machine makes an unusual noise: No water is visible in the drum: 31 29 Possible cause Solution The laundry is not evenly distributed in the drum. Pause the machine and redistribute laundry manually. There is very little laundry in the drum. Load more laundry. Unstable floors eg. wooden floors.
www.westinghouse.co.nz NOTE If you are unable to identify or solve the problem, contact our service centre. Before calling service centre, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Scan QR code PNC : Mod : S/N : Made in Thailand 9.2 Emergency Door Opening In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored.
10. TECHNICAL DATA Dimensions (Height / Width / Depth) 848 x 596.5 x 567.5 mm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed 2000 W Minimum fuse protection 10 A Water supply pressure (Maximum / Minimum) 0.8 MPa / 0.05 MPa Program Maximum dry clothes capacity Spin speed (Maximum / Minimum) Max. Capacity Off Cottons Mixed Delicates Bedding Energy Saver Tub Clean Spin Rinse + Spin Baby Care Quick 15 Daily 39 Full Wash 60 Favourite 7.5 kg 4 kg 4 kg 3 kg 7.5 kg 7.
www.westinghouse.co.nz 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the plastic bag which cover the machine. 6. Put one of the polystyrene packaging elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses. 7. Remove the polystyrene base. 5. Open the door. Remove all the items from the drum. 8. Pull up the appliance in vertical position. 9.
A 10. Remove the three transit bolts. 11. Pull out the plastic spacers. 3rd 11.2 Positioning 1st 2nd It is important that your machine stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the machine door. Use a spirit level on the top and side of the machine to check the levels. 12. Put the plastic caps in the holes (X3).
www.westinghouse.co.nz Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents vibration, noise and the movement of the appliance when in operation. clockwise “DOWN” 11.3 Water Inlet Connect the water inlet hose to a tap with 3/4” BSP thread. Use the hose supplied with the washing machine. DO NOT USE OLD HOSES. check counter clockwise “UP” When the washing machine is levelled, try to rock it from corner to corner.
In a sink, drain pipe branch. Fitting Hose Guide Pull apart to insert hose. 450 approx. 1. Hose Guide bend hose pull hose 2. Adjust length to suit trough. This branch must be above the trap so that the bend is at least 60 cm above the ground. Max. 90 cm Min. 60 cm Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appliance.
www.westinghouse.co.nz 11.5 Electrical Connection This machine is designed to operate on a 220-240 V, single-phase, 50 Hz supply. “An incorrect power supply may void your warranty.” Check that your domestic electrical installation can take the maximum load required (2.0 kW), also taking into account any other appliances in use. CAUTION! Connect the machine to an earthed socket outlet.
12. ENVIRONMENT CONCERNS 12.1 Packaging Materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing them properly in appropriate collection containers. 12.2 Old Machine Use authorized disposal sites for your old appliance. Help to keep your country tidy! The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
www.westinghouse.co.
G0034725-001-A20691818 www.westinghouse.co.
