User Manual

ASSEMBLY INSTRUCTION

E097-12S X-FRAME 3-SHELF BOOKCASE

B D

F H

3pcs 1pc 1pc

12pcs

Shelf

Bottom Back Panel

Side Panel

1pc

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

12pcs

Bolt

Ø1/4"x32mm

1pc

13pcs

Allen Key

Lock Washer

Ø1/4"

Flat Washer

Ø1/4"x15x1.5mm

12pcs

Wood Dowel

Ø8x30mm

2sets

Anti-Tipping Kit

PAGE 1
ASSEMBLY INSTRUCTION E097-12S X-FRAME 3-SHELF BOOKCASE A Shelf B Bottom C Side Panel D Back Panel 3pcs E Bolt Ø1/4"x32mm 1pc F Lock Washer Ø1/4" 1pc G Flat Washer Ø1/4"x15x1.5mm 1pc H Allen Key M4 12pcs I Wood Dowel Ø8x30mm 13pcs 12pcs J 12pcs 1pc Anti-Tipping Kit 2sets This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
1 Attach Wood Dowel (I) to Shelf (A) and Bottom (B), and then assemble Shelf (A) & Bottom (B) to the Side Panel (C) using Bolt (E), Lock Washer (F) and Flat Washer (G) in holes of Side Panel (C) by Allen Key (H). B A A H G E F A C I 2 Attach Wood Dowel (I) to Side Panel (C) and Back Panel (D), then using Bolt (E), Lock Washer (F) and Flat Washer (G) to tighten Shelf (A) & Bottom (B) with Side Panel (C) & Back Panel (D) by Allen Key (H).
PAGE 3
Remark: There is a tip restraint kit provided on the back of this product. Please refer carefully to the instruction on the tip restraint kit and following instruction picture for installation. J J Wall Wall Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.