User Manual

FUEL TANK
Make the fuel tank up as per the picture and install the tank. It is always good practice to
pack foam around the tank in order to reduce any vibration.
RECEIVER AND BATTERY INSTALLATION
The receiver and battery are installed behind the tank bay. You should always restrain all
plugs and the crystal to prevent any migration and pack the receiver in foam to reduce
any vibration. The battery is positioned to obtain the required C of G.
Battery and receiver installation area
Tank installed with foam to reduce any vibration.
It will be neccesary to bend two of the straight pipes to go to the top of the tank,
1 x for filling,1 x for exhaust pressure, the other straight pipe is for the clunk
which will be connected to the carb
The clunk should be able
to move around inside the
tank without touching the
end wall of the tank
End wall of tank