User Manual

UNDERCARRIAGE
Secure the wheels to the u/c using the wheel collets supplied. Then using the template
provided mark the holes for the screws and attach the u/c to the front of the model on the
ply plate using the four plastic securing plates and the 10mm self-tapping screws. Make
sure when installing the undercarriage that the thin wire of the undercarriage is to the
front of the aircraft. Please be aware that the screws do exceed the thickness of the ply
plate so will need to be cut down so not to damage either the fuel tank or battery if
electric.
MOTOR
If using the recommended West 36TIR motor simply mount the motor directly to the
firewall using the bolts provided so that the head is at the 7 o`clock position. If using the
engine mount simply install this using the bolts provided and mount your chosen motor to
it so the head is at the 7 o’clock position.
Front of Fuselage
Cougar u/c template
If you are installing the west 770 electric motor simply position the electric
motor mount in the centre of the fuel tank outlet hole. Then mark and drill the
mounting holes and using the bolts supplied with the electric motor install the
capture nuts. It will be necessary to remove one of the pre installed capture
nut for the west i/c engine. Before installing the motor it is necessary to drill
a small hole above the motor for the wires to enter the fuselage. Once complete
install the motor to the firewall.
Front of Fuselage
THIN WIRE
FAT WIRE