Use and Care Guide

ENGLISH INSTRUCTIONS
8
CLEANING
1. Unplug from outlet.
2. Unscrew the Front Ring Nut and remove all
parts from the Grinder Head.
3. To remove the Grinder Head, pull the lever
on the Cam Action Lock down, unlocking
the Grinder Head, and remove the Grinder
Head by pulling it straight out (FIGURE A).
4. Wash all parts that come in contact with food
in hot soapy water. Rinse with clear water.
Dry immediately. The Grinder parts are not
dishwasher safe. Do NOT use bleach.
5. Fully lubricate the Grinder Head, Grinding
Plates and the Knife with food grade silicone
spray before and after each use.
6. Clean the Main Body with a soft damp towel.
Dry immediately. DO NOT immerse the
Main Body of the Grinder in water or other
liquids.
Cam Action Lock
ELECTRICAL SHOCK HAZARD: Disconnect power
before cleaning, disassembling or assembling. Do not immerse cord,
plug or motor in water or other liquid.
!
WARNING