Use and Care Guide

ENGLISH INSTRUCTIONS
12
BEFORE ATTEMPTING
VACUUM PACKAGING BE
SURE THAT THE VACUUM
SEALER IS SET UP IN
ACCORDANCE WITH ALL OF
THE SAFETY PRECAUTIONS
LISTED IN THIS BOOKLET.
1. To open the Vacuum Lid, press
down on the corners of the Vacuum
Lid to unlock the Lid Closure Tabs
then lift the Vacuum Lid.
2. Place the items to be vacuum
sealed into a vacuum bag. Allow
at least 2” (5 cm) at the open
end of the bag in order to create
enough seal space. Be sure
not to cover the Vacuum Ports
(FIGURE 5).
3. Close the Vacuum Lid and press down while pushing in on the two Lid Closure
Tabs to lock the machine. Check that the bag opening is in the center of the
Vacuum Chamber.
4. Press and release the Vacuum & Seal Button. The Vacuum Pump will
begin removing air from the bag then automatically engage into the bag
sealing process.
5. The Vacuum Sealer will automatically stop the Vacuum Pump and release
the vacuum pressure moments later. DO NOT ATTEMPT TO PULL THE
VACUUM LID OPEN BEFORE THE VACUUM HAS BEEN RELEASED,
SEVERE DAMAGE TO THE SEALING BAR WILL RESULT.
6. To open the Vacuum Lid, press down on the corners of the Vacuum Lid to
unlock the Lid Closure Tabs then lift the Vacuum Lid.
VACUUM OPERATION
Vacuum
Ports
Lid
Closure
Tabs
FIGURE 5