Use and Care Guide

1. Remove the Power Cord from the power supply.
2. Pivot the Compartment Lever over to open the Power Cord Storage
Compartment (FIGURE 7 ).
3. Loop the Power Cord up to about 3 1/2” (8.9 cm) long segments.
4. Place the Plug end of the Power Cord in the Power Cord Storage
Compartment rst. Insert the looped portion of the Power Cord into the
Compartment next.
5. Pivot the Compartment Lever over the Compartment to keep the Power Cord
in place.
6. If storing, return the Vacuum
Sealer to the original box for safe
keeping.
7. Store the Vacuum Sealer in
a cool, dry location.
STORAGE
Power Cord
Storage
Compartment
BOTTOM VIEW
Compartment
Lever
FIGURE 7
ENGLISH INSTRUCTIONS
16