Use and Care Guide

-4-
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, AND/OR INJURY TO PERSONS, INCLUDING THE
FOLLOWING:
7. Be sure the Stuffer is stable during
use. All four feet should be secure on
a level surface. The Stuffer should not
move during operation.
8. Never operate the Stuffer with the
Gear Housing Cover open or removed.
9. Wear eye protection! Everyday
eye glasses are not safety glasses.
Safety glasses conform to ANSI Z87.1
requirements. Note: Approved safety
glasses have Z87 printed or stamped
on them.
10. Do not use while under inuence of
drugs or alcohol.
11. Household use only.
1. Read all instructions.
2. Check for damaged parts. Before
using the Stuffer, check that all parts
are operating properly and perform the
intended functions. Check for binding
of moving parts, mounting and any
other conditions that may affect the
operation.
3. Keep children away. Never leave the
appliance unattended. The Stuffer is
not a toy.
4. The Manufacturer declines any
responsibility in the case of improper
use of the Stuffer. Improper use of the
Stuffer will void the warranty.
5. Never store or leave the Stuffer at a
temperature lower than 32
o
F (0
o
C).
6. Repair must be done by an
authorized dealer. Use only factory
original parts and accessories.
Modication of the Stuffer will void the
warranty.
GEAR MOVEMENT
Fast Gear Shaft
With the Handle attached, turn
clockwise to raise the Plunger,
counter-clockwise
to lower the Plunger.
Slow Gear Shaft
With the Handle attached, turn
counter-clockwise to
raise the Plunger,
clockwise to lower the Plunger.