Use and Care Manual

ENGLISH INSTRUCTIONS
6
HOW TO USE THE DEHYDRATOR
FIGURE 7
FIGURE 8
FIGURE 9
NOTES:
• Food should be stored in an airtight container
once properly cooled.
• To START, PAUSE, or RESET:
Press or press and hold the START/STOP button.
• To Change Time or Temperature During
Drying Without Pausing or Resetting: Press
the TIME/TEMP button once for time or twice
for temperature. The last setting will ash.
Use arrows to adjust. Unit will continue drying
automatically at the new setting.
1. Plug in unit. Default time “00” will ash on
the display. FIGURE 7
2. Press the + arrow to set the drying time.
Maximum drying time is 48 hours, which can
be set in 1-hour increments. FIGURE 8
3. Press the TIME/TEMP button to set the
temperature. Default temperature “130” will
ash on the display. FIGURE 9
4. Press the + or – arrow to set the drying
temperature. Press the TIME/TEMP button to
adjust the temperature for Fahrenheit. Press
and hold the TIME/TEMP button for 2 seconds
while TEMP is displayed to change from ºF
to ºC. Temperature can be set from 100°F to
160°F in 5° increments. NOTE: Default
setting is Fahrenheit. If you reset this unit or
unplug it while it is set for Celsius, it will go
back to Fahrenheit. FIGURE 10
5. Press the START/PAUSE button to start
drying. The display will alternate from showing
TIME and TEMP over the drying period.
lid, for proper drying. FIGURE 11
FIGURE 10
FIGURE 11