Specification

Installation Instructions REV12

Rev: E

Vanity Installation Guide

Stone Care Instructions

Items Needed for installation:

1. Marble and Granite Silicone Adhesive – Loctite PL530 can be

found in the Paint Department and requires a caulking gun.

2. Caulking Gun for Silicone Adhesive #1 above.

3. Lead Based Pencil

4. Shim or Straight Edge

5. Level – 24” to 48”

6. 2 ½” Wood Screws or 2 ½” Course Drywall Screws

7. Screw Gun or Phillips head Screwdriver

8. Plumbing tools and supplies for the faucet and basin installation

PAGE 1
Vanity Installation Guide Stone Care Instructions Items Needed for installation: 1. Marble and Granite Silicone Adhesive – Loctite PL530 can be found in the Paint Department and requires a caulking gun. 2. Caulking Gun for Silicone Adhesive #1 above. 3. Lead Based Pencil 4. Shim or Straight Edge 5. Level – 24” to 48” 6. 2 ½” Wood Screws or 2 ½” Course Drywall Screws 7. Screw Gun or Phillips head Screwdriver 8.
PAGE 2
Vanity Installation Instructions: Vanity should be installed in accordance to local, state, and federal rules, regulations, and guidelines by a licensed Contractor. 1. Unpack & install feet to vanity bottom if applicable. 2. Unpack Stone top and porcelain sink. 3. Take care not to damage the top while uncrating. Exposed nails and staples can damage the top. 4. Place vanity into position. 5. Level vanity by adjusting the four jacking screws on the bottom of the feet / legs. 6.
PAGE 3
IMPORTANT: Stone Care and Maintenance Following some simple precautions, properly sealing, and using the correct cleaning methods and products, will insure a lifetime of beauty from this natural stone. Use this care guide for recommendations on routine care and cleaning. About Your Stone Top: Stone is a beautiful and durable material that will last a lifetime with the proper care and maintenance.