westwood design Assembly Instructions Newcastle Cottage Crib
Congratulations on your purchase of a Westwood Design product. We take great pride in the quality and design of our furniture. The safety of your child is our highest priority. It is important that you read these instructions carefully and completely to ensure that this product functions as it was designed. After opening the package, check to see that all the parts are present. If you think something is missing, please contact your retailer, and they can arrange to have the missing parts quickly replaced.
Step 1 A. Align the Side (B) with the Ends (A). B. Thread the three bolts into the fittings on the ends and tighten with the allen wrench. Repeat for the other side.
Step 2 A. Thread the screws on the Mattress Support (C) into the attachment holes on the crib sides and tighten with the allen wrech. There are three possible height settings. The support should be at its highest setting for newborns, then adjusted to the lower positions as the child grows and becomes mobile. Once the child is able to stand, the support should be at its lowest position.
Step 3 A. Align the Side (B) with the crib ends. B. Thread the three bolts into the fittings on the ends and tighten with the allen wrench. Repeat for the other side.
Care and Maintenance l After completing assembly, check that all bolts and screws are secure and tight. Hardware can become loose over time, so it is your responsibility to periodically check the tightness of all fasteners for as long as you use the crib. l Wood is a natural material. As such, it can be affected by changes in temperature and humidity.
