PARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS SBS0403 ………………………………………………………………………………………… Please read these instructions carefully before installing. If you have any questions regarding installation, please call our technical support specialists Monday through Friday 9:00 AM – 5:00 PM at Phone: (888) 895-1989, or e-mail our technical support group at Support@Paragonbath.com. For more information on Paragon Bath Shower Doors & Tub screens please visit www.ParagonBath.
Installing Preparations 1. After opening the carton, please read the instructions carefully, examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that Paragon Bath will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed.
Component list No. Name Q’ty No.
08 Guide rail positioning block 2pcs 25 Buffer block 2pcs 09 Guide rail sealing pad-L 1pc 26 Support bar wall base 1pc 10 Guide rail sealing pad-R 1pc 27 Support bar connect part 1pc 11 Philip’s screw ST6*40 4pcs 28 Glass shelf 2pcs 12 Philip’s screw ST4*40 1pc 29 Small stationary glass 1pc 13 Philip’s screw ST4*25 2pcs 30 Moving glass 1pc 14 Philip’s screw ST4*30 2pcs 31 Big stationary glass 1pc 15 Philip’s screw ST4*12 2pcs 32 Handle 1pc 16 Philip’s screw S
2. Place the bottom guide rail to the tub or shower base between the two walls, draw holes on the wall, then use 1/4” drill bit to drill holes on the wall, knock in the 1/4” wall anchors (17) and then lock the bottom guide rail with Philip’s screw ST4*30(14).
3. Install stationary glass 3.1 install glass positioning pad (20) Please see Fig 3 for details Fig 3 3.2.
Fig 4 3.3. Place the big stationary glass (31) to the glass positioning pad (20),draw holes on the wall through the wall clamps (33), drill holes with 5/16” drill bit and knock in 5/16” wall anchors (18) then lock the clamps to the wall.
Fig 5 3.4 Lock the glass positioning block tight and cover screw holes with screw covers (21) Please see Fig 6 for details. Fig 6 Warm tips: the small stationary glass is going to install in the same way of big stationary glass. please refer to above Fig 4, 5 and 6. 4. Install moving glass 4.1. Disassemble of sliding bracket (07).
Please see Fig 7 for details Fig 7 4.2. Install sliding bracket on big stationary glass (31). Please see Fig 8 for details.
4.3. Install rollers (22) on moving glass. 4.4. Rise the moving glass, place the roller side tipsily to the guide rail groove, adjust glass to straight slowly.
Fig 10 4.5.
4.6. Slide the sliding bracket inner cover to the moving glass, making the whole part of the sliding bracket contact together, use hexagon screw to lock them. Please see Fig 12 and Fig 13 for details Fig 12 Fig 13 5.Install support bar 5.1Close the door and lock the support bar connect part (27) to the sliding bracket. 5.2. Connect the other side of the support bar to the wall, drill holes on the wall through the holes of the support bar wall base (26) 5.3.
Please see Fig 14 for details Fig 14
6. Install glass shelf 6.1. Lock glass shelf clamp A(23) on small stationary glass(29). 6.2. Lock the glass shelf clamp B (24) to the wall. (in this way, it’s better to snap the clamp B to the glass shelf(28) first and push the glass shelf to the clamp A which have installed on stationary glass, then make the glass shelf touch to the wall, adjust the level to get best result and pull the glass shelf out, then draw holes on the clamp B. 6.3.
05 06 07 08 Fig 15 7.
8. Install buffer block Use Philip’s screw ST4*12(15) to lock buffer block to bottom guide rail. Please see Fig 17 for details Fig 17 9.
Fig 18 10.
Product Maintenance To ensure long lasting life for your shower door/bath tub screen, please clean the dust or stains use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. To ensure a long lasting hardware finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid.
WARANTY INFORMATION This is Paragon Bath LLC exclusive written warranty effective August 8, 2014 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to Paragon Bath LLC products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
material, including but not limited to tiles, marble, contract, negligence, strict liability in tort, or warranty of any kind) for any indirect, special, incidental, consequential, or exemplary damages (including but not limited to lost profits). Paragon Bath LLC is not responsible for installation, removal or reinstallation costs of any product requiring warranty services. Improper modification or alteration of any Paragon Bath LLC products will void the warranty.
building code restrictions on installation or use and any such compliance is excluded from this warranty. Paragon Bath LLC reserves the right to modify this warranty at any time - such warranty modification will not alter warranty applicable at the time of sale of the products in question. Product must be registered within 30 days from time of purchase at www.ParagonBath.com WARRANTY Paragon Bath LLC.