Owner's Manual

wet sounds
RGB Expansion Amplifier
Thank you for choosing Wet Sounds for your RGB LED lighting system! The Wet Sounds RGB
Amplifier is designed to make your RGB lighting expansion quick and easy! Simply add on to
your Wet Sounds RF RGB Music Controller (RF-RGB-MC V2, required) so you can amplify the
RGB signal for unlimited RGB lighting expansion on your boat, ATV or any 12v application!
Applications:
• For Wet Sounds RGB SPOOLS & RGB Speaker Ring Kits
• For use on 12v vehicles, A TV's, and Marine Craft
• For RGB Lighting Expansion
(Up to 35 Feet
of RGB lights per RGB Amp)
Features:
• High Output.
• Low power consumption
• Compact Aluminum housing.(Not Waterproof)
Specifications:
• Operating Voltage: DC12V
• Operating Current: Max 12A.
·Output Power: Max 144W (12V)
• CE, RoHS Compliant.
Dimensions:
80mm
Safety matters! Please follow all12v installation guidelines for safe use on your vehicle. Lt.
1. Do not install the product in areas with a strong magnetic field or high SPL sound pressure.
2. Make sure your conneciions are correct and the RGB Aiv1PLiFIERplus each LED run is individuaily fused
to protect from a short circuit.
3. Please install the RGB AMPLIFIER in an area with good ventilation to ensure proper heat dissipation.
4. Please ensure that the RGB AMPLIFIER has a fused12v power input.
5. Please connect all RGB strips to the unit before connecting to 12v power.
6. Wire the Wet Sounds RGB AMPLIFIER to a master switch to shut off power when put into storage or the
vehicle
is not in use.
?.Please contact Wet Sounds for any questions concerning your Wet Sounds RGB AMPLIFIER.
www.wetsounds.com