Owner's Manual
Wet Sounds WS-MC-20 1 Piece Marine Receiver Operations / Installation Manual
09
WS-MC-20 BASIC CONTROLS
• SXM Default Reset:
Press SET-UP button and use the MCK to select SYSTEM, FACTORY DEFAULT, RESET SXM
and depress the MCK to conrm.
• Album Art:
Album art can be displayed for most of the SiriusXM music channels. When album art
is not available, the channel logo or the SiriusXM logo will be displayed.
Note - Compatible with SXV200 or later tuner models. Not all music channels contain
album art images.
Auxilary Input Operation: Press SOURCE, then select the symbol to allow access
to the 3.5mm auxiliary input on the MC-20. This can be used to allow connection of a
variety of audio sources.
6. PLAY/PAUSE: This is active when using the Bluetooth Streaming. Press once for
pause, once again for play.
7. BACK: This will revert to the previous screen.
8. ZONE 2 - : Decrease the output sent to the ZONE 2 preamp outputs.
9. ZONE 2 + : Increase the output sent to the ZONE 2 preamp outputs.
Note – the main volume control will still override nal output of Front, Rear & ZONE 2
outputs.
10. TRACK BACK/RADIO TUNER SEEK DOWN: In Bluetooth mode, this will go back to
the previous track. In Radio mode, this will seek out the strongest station in decreasing
frequency order.
11. TRACK FORWARD/TUNER SEEK UP: In Bluetooth mode, this will go forward to
the next track. In Radio mode, this will seek out the strongest station in increasing
frequency order.