Owner's Manual
4WS-MC1 BASIC CONTROLS
LIGHTING Allows access to each lighting zone. The options are:
RENAME
Allows a customized label (8 characters max) to be applied
to each zone. To change the characters, rotate the MCK until the desired
letter or number is displayed, then press the MCK to move to the next
character & repeat the process. Once the zone label is changed, press
the MCK repeatedly until all 8 characters have been changed (a blank
VSDFHLVDYDLODEOH2QFHWKH]RQHLVUHQDPHGWKH0&ZLOOFRQ¿UPWKH
action via the display. All zones are capable of being renamed with a
custom label.
ZONES Selecting this allows access to each audio zone.
The options are:
ENABLE/DISABLE
When a zone is disabled, it will no longer appear
on the screen.
RENAME
Allows a customized label (8 characters max) to be applied
to each zone. To change the characters, rotate the MCK until the desired
letter or number is displayed, then press the MCK to move to the next
character & repeat the process. Once the zone label is changed, press
the MCK repeatedly until all 8 characters have been changed (a blank
VSDFHLVDYDLODEOH2QFHWKH]RQHLVUHQDPHGWKH0&ZLOOFRQ¿UPWKH
action via the display. All zones are capable of being renamed with a
custom label.
ENABLE/DISABLE When a zone is disabled, it will no longer
appear on the screen.
BLUETOOTH Displays a list of Bluetooth devices available for
connection to the MC1. To connect, disconnect, or delete a displayed
device, rotate the MCK until the desired device is highlighted, then
choose Connect, Disconnect, or Delete using the buttons (6) below the
display. Make sure the Bluetooth on the device is enabled (through the
GHYLFH¶VVHWWLQJV7KH0&ZLOOFRQ¿UPWKHDFWLRQYLDWKHGLVSOD\
LEVEL ADJUST Allows individual volume level adjustment of the
Bluetooth Audio and the Auxiliary inputs. Ideally all input sources in a
system are the same volume level, but if not this adjustment might be
needed if the output level of the Bluetooth Audio or the Auxiliary sources
are louder than the other sources.
Wet Sounds WS-MC1 MARINE MEDIA CENTER SYSTEM Operations / Installation Manual