Owner's Manual

AUTO DIMMER Allows two options: When ON is selected, the
display on the MC-MD is controlled by the dimming switch on the vessel.
PLEASE NOTE – in order for this function to operate properly, the
Orange wire in the MC-BB harness labeled DIM INPUT must be wired to
a circuit in the vessel that gets +12V whenever the main lighting switch is
turned on. When OFF is selected, the dimming circuit of the vessel will
not affect the display of the MC-MD.
SOFTWARE Allows access to the software menu of the MC1. :
VERSION Displays what version of the operating software is currently running
on the MC1. Please visit www.wetsounds.com/downloads to see the most up to
date MC1 operating software.
SHORTCUT KEYS Allows any source to be assigned to the
3 shortcut keys. Once in the Shortcut key mode, use the MCK to select
from the available sources, then use the buttons below the display to
assign the sources to SC1, SC2, or SC3. After the Shortcut keys are set
up, pressing these buttons will select the source set to that key.
LABEL PRESETS Allows the 3 shortcut keys to have customized
labels applied (up to 8 characters).
LCD BRIGHTNESS Allows adjustment of the brightness of the
display. Adjustment is made by either rotating the MCK, or using the
buttons (6) below the display.
DAY NIGHT MODE Allows the ability to scroll through the display
options of DAY (white screen/black characters) NIGHT (black screen/
white characters) or AUTO. In AUTO mode, the display is in DAY mode
until the vessel’s lights are turned on, then the display goes into NIGHT
mode. PLEASE NOTE – in order for the AUTO function to operate
properly, the Orange wire in the MC-BB harness labeled DIM INPUT
must be wired to a circuit in the vessel that gets +12V whenever the
main lighting switch is turned on.
CLOCK Selecting this allows the clock to be set. Adjustment is made
by either rotating the MCK, or using the buttons below the display.
5 WS-MC1 BASIC CONTROLS
Wet Sounds WS-MC1 MARINE MEDIA CENTER SYSTEM Operations / Installation Manual