Owner's Manual
Each zone will display the Power & Mode status on the main
Lighting Display screen. For instance, if Zone 1 is showing
“ON/Change” that indicates that Zone 1 is turned on & will be
alternating RGB colors.
Color Selecting this enables the color selection screen for one zone.
Rotate the MCK to highlight the desired RGB color & press the MCK to
select it. The color chosen will be displayed for each zone on the main
lighting control screen.
Fade Rate Selecting this enables control of the rate of fade when the
fade effect is chosen.
Intensity Level Allows the adjustment of the output (or brightness) of
that zone’s RGBs.
8
Operation Press SOURCE (2X), then LIGHTING to access the lighting
control screen. Select which zone you want to control by using the
buttons below the display (6), then rotate the MCK to select the feature
you want to adjust, then press the MCK to select it.
Power Mode Selecting this enables access to the Power/Mode feature.
This allows you to quickly turn on/off either the zone selected, or all
zones. The MODE feature allows the choice of a variety of LED effects:
• Solid - RGBs remain continuously lit at one selected color.
• Fade - RGBs fade from zero illumination to full illumination
based on the rate chosen.
• Music - RGBs react to the beat of the music - Please make
sure that the AUX out (3.5mm) on the MC- BB is
connected to the music input of the WS-4Z-RGB-BB to
make this feature function.
6WUREH±5*%VÀDVKFRQWLQXRXVO\
• Change – RGBs alternate colors.
Wet Sounds WS-MC1 MARINE MEDIA CENTER SYSTEM Operations / Installation Manual
WS-MC1 BASIC CONTROLS