ASSEMBLY INSTRUCTIONS LOFT BED WF281725 SAFETY WARNINGS 1-Follow the information on the waning label appearing on the upper bunk bed and structure on the carton Do not remove warming label from bed 2-Amway use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. 3-Surface of mattress must be at least 5 inches below the upper edge of guard rails. 4-Do not allow children under 6 years to use the upper bunk bed.
STEP 1: NOTE: in this step, DO NOT tighten any bolt unt you connect all part together STEP 2: NOTE: in this stein, DO NOT ugh ten ary bolt until you connect al part together STEP 3: G i PCS G NOTE: in this step, DO:NOT tighten any bolt until you connect all par together STEP 4: A i NOTE: in this step, DO: NOT tighten any bolt until you connect all par together
PC8 | 8PC8 STEP 7: STEP 8: STEP &: STEP 6: this step, DO NOT tighten any bolt together unit you connect al part NOTE: in
COMPLETED SAFETY WARNINGS AND GENERAL NOTES: Follow the information on the wakings on the bunk bed end structure and on the carton. Do not remove the warning label from the bed. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls. The top surface of the mattress must be at least 5* (127mm) below the upper edge of the guardrail. Do not allow children under 6 years of age to use the upper bunk.
