Installation guide

INTRODUCING FIVE PREPARATIONAL STEPS

Knowing what hardware you need and having chosen the perfect setup for your studio(s), it is time

to start planning the installation. Below, we have listed five steps that will help you be fully prepared

for installation. In case, you already have a projector and projector screen installed, only steps 1, 4,

5 and 6 are relevant but we do recommend going through all steps.

STEP 1: PLACEMENT OF PLAYER

Depending on choice of player, there will be different considerations when deciding where to install

it. Our recommendations are described below:

ON DEMAND PLAYER

 Our recommendation: outside the studio as close to the studio door as possible (Attracts

attention, might bring new people into the studio, members can browse the system, and it

simply looks good)

 Alternative: inside the studio as close to the studio door as possible (No unnecessary

attention will be brought to the On Demand player)

The On Demand player can be placed on any type of wall, except for glass walls. We offer two types

of wall brackets; 1) a slim wall bracket for when wires can be hid elsewhere, 2) a wall bracket with

tilt allowing wires to be hidden behind the player. Make sure to select the right bracket on the Pre-

Installation Order Form. Regardless of wall-bracket choice, we recommend an installation height

between 1.6–1.7 meters/5 feet to the top of the player. If your studio has glass walls only, it is

possible to purchase a stand. Ask your Wexer Virtual contact person for more details.