Installation guide

16
READY TO INSTALL?
A well-executed installation is crucial to run virtual training successfully. With that, our
recommendation is always to go through all preparations listed above, to have professional people
perform the installation and to make sure the installation team signs off on the Installation
Confirmation (cf. app. 1). All hardware delivered by Wexer Virtual comes with Installation manuals.
NOTE: If hardware is NOT purchased from Wexer Virtual, make sure to get the installation manuals
from the supplier.
In the below, we go through the cabling for the players and the projector. We also provide quick tips
for the actual installation.
1: MOUNTING THE PLAYER
ON DEMAND PLAYER
Unpack the On Demand player and the package with the wall bracket and follow the guides as listed
below:
 For the installation of the On Demand player with a slim wall bracket please follow the
installation manual called Install On Demand Wall Bracket – slim
 For the installation of the On Demand player with a wall bracket including space for cables,
please follow the installation manual called Install On Demand Wall Bracket – tilt
The guides are included in the package but can also be downloaded on our website
(http://bit.ly/wexervirtual-installation). Having mounted the wall bracket on the wall and on the back
of the on demand player, it’s time to place the cables at the back of the player (Power, Internet,
Audio, VGA). Place the cables as shown below:
Having placed the cables, you are now ready to attach the player to the wall plate.