Installation guide

18
2: MOUNTING THE PROJECTOR
Depending on the choice of projector and the ceiling height in your studio, the choice of ceiling
mounting will vary. Wexer Virtual offers two brackets:
 A standard ceiling mounting (for regular ceiling heights)
 An extended ceiling mounting (for ceiling heights of more than 5 meters – 16.4 feet)
Both mountings come with manuals. When purchasing your projector and ceiling mounting from
another party, make sure installation manuals are included.
The image below illustrates where to place the VGA and power cable on our standard projector:
Having installed the projector, we suggest checking the settings on the projector using the projector
remote control:
 Resolution: 1280x720 ( If you select “normal”, the image is projected in the same resolution
as the input signal )
 Direct Power  on
 Lamp dimming  off
Make sure to adjust the projector in order for the image to fit the screen perfectly (see below). Also,
you will very likely need to adjust zoom and focus. More information can be found in the Projector
Manual included in the package.