Installation guide

19
An image fitted perfectly to the screen
4: FINAL ADJUSTMENTS
Having followed the steps above, you are now ready to make the final adjustments. Make sure to
turn the player on (IMPORTANT: do not turn on player before having installed the projector and
screen properly). If everything is installed correctly, the player will start working immediately.
Also, make sure to test the network connection to the player (log in to your Wexer Admin account
and check the internet information in the top right corner. Finally, we suggest you test (and
potentially adjust) the sound.
ADDITIONAL RECOMMENDATIONS
 Do not go cheap on the projector: If the room has a lot of daylight go for a projector with
more lumens, or even better – go for a TV wall solution.
 Make sure the picture fits the screen perfectly (correct mounting of projector and screen)
 Make sure the sound is good and loud enough. Also, ensure that instructors do not turn it
down without turning it back up.
 To get the best and brightest footage, we always recommend a minimum amount of light in
the studio. The rule of thumb is “the darker, the better”. For studios with windows, we
suggest limiting sun exposure as much as possible.
 A lot of group exercise and cycling studios have mirrors. Our recommendation is to place
the screen on the opposite wall or to remove the mirrors completely.