Assembly Instructions

Wire Shelving
For questions or concerns, please call
Consumer Hot Line
ASSEMBLY INSTRUCTIONS
Sort and count your parts!
Determine the desired
position of the bottom shelf
(only); on each post, place
two C Half-Sleeves around
the post at the correct
position, with the LARGE
ends of the sleeves toward
the BOTTOM of the post and
the ridges inside the sleeves
fitting into the grooves in the
post. Press the two halves
until they snap together.
NOTE: the bottom shelf
must be mounted no more
than 12" from the floor.
2
QQ
QQ
Q
LARGE
END
SMALL
END
RIDGE
GROOVE
QQ
QQ
Q
E
QQ
QQ
Q
A
QQ
QQ
Q
A
QQ
QQ
Q
B
QQ
QQ
Q
B
QQ
QQ
Q
C
QQ
QQ
Q
C
ADD-ON
UNIT
QQ
QQ
Q
D
ADD-ON UNIT
Set unit upright. Press shelf firmly at each shelf
corner, close to corner holes until firmly seated.
3
4
Stand a D Shelf on end, and from the BOTTOM side
of the shelf (the bottom side is recessed), slide the
TOP end of a post through a corner hole until the half-
sleeves are seated in the corner hole. Repeat with
remaining posts.
QQ
QQ
Q
QQ
QQ
Q
D
When ordering replacement parts,
please specify Black or Gray color.
To build the four corner
posts, screw the A Lower
Posts (with levelers) onto
the B Upper Posts (with
plastic caps). Hand
tighten.
1
QQ
QQ
Q
QQ
QQ
Q
QQ
QQ
Q
A
QQ
QQ
Q
B
Lower Post (with leveler) 4
Upper Post (with plastic cap) 4
Half-Sleeve 32
Shelf 4
Q
Q
Q
Q
LETTER
CODE
DESCRIPTION QTY. PART NO.
A
B
C
D
Lower Post (with leveler) 2
Upper Post (with plastic cap) 2
Half-Sleeve 16
Shelf 4
S-Connecting Hook 8
Q
Q
Q
Q
Q
LETTER
CODE
DESCRIPTION
QTY. PART NO.
PARTS LIST: ADD-ON UNIT
A
B
C
D
E
PARTS LIST: STARTER UNIT
SHOWN ASSEMBLED:
STARTER UNIT and
ADD-ON UNIT
STARTER
UNIT
STARTER UNIT

Summary of content (4 pages)