OWNER’S MANUAL 4-TIER NSF 48” x 24” x 72”WIRE SHELVING RACK – BLACK
PARTS LIST Your 4-Tier NSF 48” X 24” Wire Shelving Rack – Black should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact Customer Service. Parts can also be requested online. You will need no additional tools for assembly.
ASSEMBLY INSTRUCTIONS STEP 1: SLIP SLEEVES For easiest assembly, do not attach the TOP (B) and BOTTOM (A) POLES until instructed. Once connected, these will be the posts for the rack. Note that each POLE (A+B) has slight horizontal line indentations at 1” intervals. Each SLIP SLEEVE (D) has raised horizontal lines inside designed to lock them in place on the POLE (A+B). A (4) D (8) On the BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D) at the desired level.
ASSEMBLY INSTRUCTIONS STEP 3: INSTALLING SHELVES On POLE (A), place 1 pair of SLIP SLEEVES (E) at the desired distance between SHELVES (C). Please make sure the arrow faces up and that the word “TOP” is right side up. Do this for each POLE (A), and make sure that the heights are identical for each POLE (A). D (8) C (1) Lower SHELF (C) over the BOTTOM POLES (A) so that the corner cylinders of the SHELF (C) are positioned over the SLIP SLEEVES (D). Repeat Step 3 to install other SHELVES (C) as desired.
ASSEMBLY INSTRUCTIONS STEP 5: INSTALLING SHELVES On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired distance between SHELVES (C). Please make sure the arrow faces up and that the word “TOP” is right side up. Do this for each POLE (A+B), and make sure that the heights are identical for each POLE (A+B). D (16) C (2) Lower SHELF (C) over the TOP POLES (B) so that the corner cylinders of the SHELF (C) are positioned over the SLIP SLEEVES (D). Repeat Step 5 to install other SHELVES (C) as desired.
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description Description 1) Slip Sleeve 5) Feet Leveler 2) Top Pole 6) End Cap 3) Pole Connector 7) Shelf 4) Bottom Pole 7 1 2 6 3 4 5 5
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
PRODUCT REGISTRATION Thank you for purchasing a 4-Tier NSF 48” X 24” Wire Shelving Rack – Black. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form (2) complete the Product Registration Form online or (3) scan and email the form . Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 4-Tier NSF 48” X 24” Wire Shelving Rack – Black We warrant to the original consumer purchaser (“Purchaser”) of the 4-Tier NSF 48” X 24” Wire Shelving Rack — Black (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
