Installation & Assembly

These units should be placed on a level surface. Failure to do so can result in poor product performance or create a possible
safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not included. Do not
use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY PART OF THE UNIT, OR
USE IT AS A LADDER. Do not store aquariums on this unit. Evenly distribute the weight on each level and always keep the
heavier loads on the bottom. Use care when working with metal parts, wear gloves for protection.
D - Wood Shelf
C - Post
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood be-
tween the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
A - Beam
B - Brace
Steel Storage Rack
E - Inside Coupler
4 Shelf 60”h x 18”d x 36”w
Description Qty Part Number
A beam 8
B brace 8
C post 8
D shelf 4
E coupler 4
4 Shelf 60”h x 18”d x
36”w
Description Qty Part Number
A beam 8
B brace 8
C post 8
D shelf 4
E coupler 4