User's Manual

Sentinel Installation Manual
9
Important Notes
1. Keep in consistence with AC24v wiring order when powering all fields RAD, and connect
all Field RADs to one dedicated power source.
2. If using WG SPS-24 unit, don’t connect the grounding wire to power supply unit at AC
input side. (refer to Dual Backup 24vac Powers Connection Diagram session)
3. If tag pin is not inserted, POS RAD will not able to arm, disarm and disalarm the tag.
4. When pointing the Remote at the field RADs the distance between Remote and RAD can be up
to 5 meters. But not too close to RAD, the minimum operation range is 5cm.
5. Field RAD, EAS RAD and POS RAD are all internally unique to serve different functions within
the Sentinel system and must not be mixed up and replace each other.