Manualshelf

User's Manual

ManualsBrandsWG Security Products ManualsElectronics58 kHz Electronic Article Surveillance System
11121314151617181920
Common Platform EAS Systems
11
Fuse Replacement Information (Transceiver PCB)
The fuse holder is accessed through the pedestal side panel.
1. Equipment shall be electrically disconnected from
the main circuit supply when replacing the fuse.
2. Remove the fuse holder with a screwdriver,
rotating it in a counterclockwise direction.
3. Replace the fuse in accordance with the
specification noted above.
WARNING
–
TO REDUCE THE RISK OF DAMAGE, REPLACE ONLY WITH
THE SAME FUSE TYPE AND RATING.
Fuse Replacement:
5mm x 20mm
3.15A (Normal Fuse)
2.5A (Slow Blow Fuse)