User's Manual

Common Platform EAS Systems
15
Interconnection between Smart Power Supply and Pedestal
The system transceiver board has two sockets (combined pins 1 to 6) that connect to SPS
output terminal pins 1 to 6 (one-to-one pin connection). The reference diagram shows the pin
mapping relation between transceiver board and PSU.
Pin 1
Pin 6
Pin 6
Pin 1
Isolated Multi
p
le Conductor Cable
Un-Shielded
Cable Conductors Specifications
Note: Specifications are calculated at 30 meters (100 feet) length.
Pin Conductors Gauge AWG Description
1 Conductor 1 1 mm
2
16 Power (Common Ground)
2 Conductor 2 1 mm
2
16 Power (26 Vac)
3 Conductor 3 0.5 mm
2
20 TX OFF
4 Conductor 4 0.5 mm
2
20 Alarm
5 Conductor 5 0.5 mm
2
20 Jammer-Detection
6 Conductor 6 0.5 mm
2
20 Alarm Volume
Caution! One SPS can powe
r
only one transceiver pedestal.