User's Manual

Common Platform EAS Systems
16
Power Cord Notices
The SPS delivered does not include AC cable for installation except a short testing cable; we
recommend that you use a CE approved power cord H05 VV-F or H05 VVH2-F2 (Refer to the
Electrical code which governs your country for installation of an Anti-Theft Unit to the Main
power Supply) with the cable specification and gauge provided below.
North American Power Supply Cords
This equipment is supplied with an external power line at one end and a
molded receptacle terminal block at the other end. Conductors are color coded
white (neutral), black (line) and green or green/yellow (ground).
Operation of this equipment at voltages exceeding 130 VAC will require power
supply cords which comply with NEMA configurations.
International Power Supply Cord
This equipment is supplied with an external power line at one end and a
molded receptacle terminal block at the other end. Conductors are CEE color-
coded—light blue (neutral), brown (line) and green/yellow (ground). Other IEC
320 C-13 type power supply cords can be used if they comply with the safety
regulations of the country in which they are installed.
Main AC input Cable Specifications.
Pin Conductors Gauge AWG Description
1 Conductor L 0.75 mm
2
18 Main AC Live
2 Conductor N 0.75 mm
2
18 Main AC Neutral
3 Conductor GND 0.75 mm
2
18 Main AC Gnd