User's Manual

Page: 9
FLOW CHART OF SUGGESTED TUNING PROCEDURES
System Defaut
Weak Performance & or False alarms
from your systems or theirs
Check Noise "D"
D B
Alternate between D1-D6 & B to
get most favorable parameters
( Low Noise Level )
If noise is less than 80 If noise is higher than 80
H A
If OK - You are done If noise is higher
1/2 of new noise or less=value than 80 Adjust Gain
increase slightly if False Alarms to 0
IF Not Acceptable
Check Noise Value and
Sensitivity of the System .
C H
If system is picking well,
Adjust until sensitive enough Your'e Done, If weak
then increase until stable adjust H to approximately
1/2 of Noise Level, if false
alrarms adjust slightly
Upward
C
Adjust from C6 to C1
until system is working
well. Than adjust Up
until system is stable
*Always Watch the system for about an Hour to ensure that you have chosen stable paramaters