User's Manual

Page: 12

Parameter Type Description

A. Gain Adjustment (range: 0-1)

There are two choices here, input 1 to select high gain, 0 to low gain.

Fig. 3

B. Sychron Adjustment (range: 1-250; increment: 1)

It is the time from zero crossing point to the start point of transmitting burst.

This is usually set for multiple systems working on a different power line with

phase problem. The range is 1~250, each stands for 34u seconds.

Fig. 4.1

Under this entry, you can also see the different noise condition (from the light

segment display and number indication) at a different phase when the

adjustment goes on. It will help you to select a relative “clean” phase

environment to set the system on.

Fig. 4.2