58kHz DOUBLE CHECKER MANUAL WG SECURITY PRODUCT INC. 161 San Lazaro Ave. Sunnyvale, CA 94086 USA Tel: 1-877-494-2288 (Toll Free) 1-408-530-8070 Fax: 1-408-530-8074 Website: www.wgspi.com E-mail:info@wgspi.
TABLE OF CONTENTS SECTION ONE SYSTEM DESCRIPTION..…………….…………………….…………………..………..………..P1 SECIFICATIONS ……………..………..………………………………………..……………….....P2 PARTS LIST …..…………………..…………………………………………..……………….…....P4 SECTION TWO INPUT POWER NOTICES………….……………………….……...……….…............................P5 QUICK START INSTRUCTIONS ..…………………………………………………………….…..P6 PROBLEMS …………..…………..…………………………………………………..…….……....P8 SECTION THREE IMPORTANT SAFEGUARDS AND REGULATORY NOTICES………………………….…….
Overview SYSTEM DESCRIPTION Double checker is a compact size Electronic Article Surveillance detector that works with any 58kHz accousto-magnetic tags and labels. This device is plug and play, which eliminates the need for expensive technicians in installation. Double checker has the latest signal processing technology that constantly checks the environment and can operate at a higher level of sensitivity, resulting in an excellent detection height of 15cm above the device surface.
SPECIFICATIONS Deactivation Pad Alarm Indicator Page: 2
Mechanical Dimensions (L x W x H) Double checker box …………….. 34 x 24 x 2.5 cm (13.4 x 9.5 x 1 in) Unit weight ……………………….. 0.70 kg ( 0.3 lbs) Power supplier……………………. 65 x 51 x 8 cm (25.6x20x3.1 in) Unit weight ………………………... 0.3 kg ( 0.14 lbs) Electrical AC Voltage for power supply.………100-120VAC 220-240VAC @ 50-60Hz Current Draw ……………………..… 0.027Arms Input Power ……………………….… < 6 watts AC Voltage for double checker.…… 10VAC x 2 Current Draw ……………………..… 0.1Arms Input Power ……………………….
PARTS LIST WGDC58K …………………………. Double checker box WGDCPS110 ………………………. Double checker power supplier 110VAC (USA) WGDCPS220 ………………………. Double checker power supplier 220VAC (Europe) WGDC58K Manual 1 PC 1 OF 2 PC 1 PC Power Supply (1 of 2 types) CHECK THE TYPE WITH LOCAL POWER VOLTAGE l WGDCPS110 110VAC input for US l WGDCPS220 220VAC input for Europe INPUT POWER NOTICES Double checker requires two of 10VAC 0.1Arms power. Customer can use transformer provided within the package.
PLEASE CHECK THE TYPE OF TRANSFORMER WITH LOCAL POWER VOLTAGE BEFORE APPLYING AC TO DOUBLE CHECKER AC Voltage for power supply.………100-120VAC @ 60Hz 220-240VAC @ 50Hz Current Draw ……………………..… 0.027Arms Input Power ……………………….… < 6 watts AC Voltage for double checker.…… 10VAC x 2 Current Draw ……………………..… 0.1Arms Input Power ……………………….
Before You Install Congratulations on your purchase of one of the finest EAS devices on the market. This is the Installation Instructions manual. Receiving Inspection Inspect all shipping containers for any signs of damage. If any is found, notify the shipping company. If there is no obvious damage, continue with the unpacking instructions. Unpacking Instructions Carefully remove the contents of container and place on a flat level surface.
How to deactivate labels l Label alive Place label with merchandise within detection range (vertical detection is preferred) of double checker to make sure it’s not yet deactivated. l Deactivate Secondly, place label onto the deactivation area, making sure that label fully lies on the surface of the area. Wait 1 second. l Double check Then lift label to proper detection range again (vertical detection is preferred) to make sure that the label is fully deactivated.
and the system still malfunctions, our technicians will help with phone support. For Tech Support In Your Country Please Visit Our Web Site www.wgspi.com. IMPORTANT SAFEGUARDS AND REGULATORY NOTICES Federal Communications Commission statement: This device complies with part 15 of the FCC Rules.