User's Manual

Page: 6
Before You Install
Congratulations on your purchase of one of the finest EAS devices on the market. This is
the Installation Instructions manual.
Receiving Inspection
Inspect all shipping containers for any signs of damage. If any is found, notify the
shipping company. If there is no obvious damage, continue with the unpacking
instructions.
Unpacking Instructions
Carefully remove the contents of container and place on a flat level surface. Compare
the contents with the Part List to ensure that there no missing items. Make a note of any
discrepancies.
Equipment Inspection
Inspect all equipment for damage. Items to specifically check, and damage to look for,
are listed below:
l Connectors for bent or broken pins
l Cables for crimped or broken wires
l Plastic housing for any obvious signs of damage
If any damage is found, contact Customer Service at the telephone number in the front of
this manual. If any item is damaged, DO NOT make any power or signal connections to
the unit unless otherwise advised to do so by Customer Service.
If there are any discrepancies between the Manual Set Inventory sheet and the manuals
received, or between the Packing List and items received, contact Customer Service at
the telephone number at the front of this manual. If there are no discrepancies and either
no damage, or GVG-advised correction action is made, continue with this manual.
OPEERATION INSTRUCTION