User's Manual

58KHz Mono-Guard Transceiver System Quick Start
This type of installation also
consists of a single Mono-
Guard
post while with coverage of a 6 foot
wide opening. The post is mounted
in the middle of the door with a 4
feet maximum detection on either
side. The Mono-
Guard can be
instal
led close to a metal door or
frame with out decreasing the
detection range, how-
ever we do
recommend that the when using a
neon light, the system should be
installed 12 ft away, if this is not
possible you can install our noise
shield over the transformer
to
eliminate this problem.
This type of installation consists
of one master and one slave
Mono-
Guard system with one
interconnection from slave to the
master. The gates are mounted
on both sides of the opening and
can cover a maximum range of
8 feet between the pedestals.
The Mono-
Guard can be installed
close to a metal door or frame
with out decreasing the detection
range, how-
ever we do
recommend that the when using
a neon light, the system should
be installed 12 ft away. If this is
not possible you ca
n install our
noise shield over the transformer
to eliminate this problem.