User Manual

Premier Guard Installation Manual
11
Installing the PLCU
The PLCU has one TX Control Signal connector and four RX Signal connectors. Connection
to the transceiver is described in the following sections. The PLCU can be installed on the
wall via the integrated mounting bracket.
To mount the PLCU to the wall:
1. Using the mounting bracket as a template, mark four holes on the wall at the location you
intend to install it.
2. Drill holes into the wall and insert anchors or screws. Note: the mounting method must be
able to support 3.5kg (7.7 lbs).
3. Attach the mounting bracket to the wall. Screw it firmly to the wall with the proper screws.
Mounting Screw
Holes (4 places)
Mounting
Bracket
A
ll dimensions are in millimeters.
Suggested Mounting Information
1. Wallmount Holes – 4mm diameter
2. Wallmount Screws – 5x30mm self-tapping screws
with 8.2mm head.