User Manual

Premier Guard Installation Manual
13
(All dimensions are in millimeters.)
Cable Inlet Slot
Plexiglas Antenna
Transmitter Board
Top View of Pedestal
Note: To direct cables through the inlet
slot, first unscrew the cable wires from the
connectors and lead the cables through the
slot. Then re-attach the wires onto the
connector, following the correct pin
mappings noted on the connection tables
in the next few pages.
Left Middle Right
Red
(Brown)
24vac
Yellow
(Green Stripe)
GND
Blue
0v
Left Middle Right
GND Brown Blue
Left Right
Red Black
Connector for Power Connector for Control Signal Connector for RX Signal