User Manual

Premier Guard Installation Manual
27
Key ID A: Gain Adjustment
(Range: 0-1)
• Press [GN] – panel displays as per Figure 3.
• Input parameter number.
• Press [CON] to accept the parameter.
Figure 3.
Key ID B: Sync Adjustment (Range: 0-250; increment: 1)
This sets the time from zero crossing point to the start point of transmitting burst. It is
important to eliminate crosstalk between different systems. Setting the default value to b-1 will
in most cases not interfere with other AM products.
• Press [SYN] – panel displays as per Figure 4.1.
• Input parameter number.
• Press [CON] to view the nose conditions. Display will be as per Figure 4.2.
Figure 4.1
Under this entry, you can also see the different noise condition (from the light segment display
and number indicator) at a different phase when the adjustment is applied. It will help you
select a relatively “clean” phase environment for the system.
Figure 4.2
CH 1
CH 2
A 1
b 1
13
- 74