User Manual

Premier Guard Installation Manual
28
Key ID C: Receiving Window Delay
(Range: 0-14; increment: 1)
You can input a number from 1-14. The larger the number, the later the receiving window will
be opened.
• Press [RE] – panel displays as per Figure 5.
• Input the parameter number.
• Press [CON] to accept the parameter.
Figure 5.
Key ID D: Noise Condition Display (Range: 0-4)
There are 6 noise level channels displaying different noise types from the two antenna
channels. The noise value range is 0 to 999. Usually any noise larger than 100 will be
considered as heavy noise. See details in the next table.
Note: If the noise condition display is open, the alarm will be deactivated unless you
input 0 to shut down the display.
• Press [NSE] – panel displays as per Figure 6.1.
• Input the parameter number.
• Press [CON] to accept the parameter – panel displays as per Figure 6.2.
Figure 6.1
Figure 6.2
CH 1
CH 2
C 4
d 4
94
- 13