Instructions / Assembly

2018 - Product Assembly & Installation Instructions
For ALL IN THE WALL MODELS
©2012 WG WOOD PRODUCTS, 213 FIELD END ST. SARASOTA, FL 34240
[phone] [e-mail]
10. You can do this either before it is installed in the wall, or after.
The hinges can be mounted on either side of the cabinet for a left or right
door swing. Your cabinet may have either a knob or handle(s), depending
on the model.
11. For knobs and handles, drill a 3/16” hole where you want your cabinet
knob or handle located. If your cabinet has a handle, the spacing between
the two holes should be 3” center to center. If you order a Bar Pull handle
the spacing between the two holes is 3 ¾” center to center.
A wood template is provided to help you drill for handles or Bar Pulls in your
hardware package. After marking your door, you can use the wood template
as a backer behind the door when drilling for a nice clean hole.
See figure A
Figure A