Technical Manual

Technical Manual BLK 100 WH Münzprüfer Dietmar Trenner GmbH, Germany
version 1.90
page 6/11 subject to technical modification BLK 100
On the back of the key fob reader you have to press the push button e.g.
with a paper clip as indicated below.
Fig. 3 Location of the push button
Once the key is pressed the LEDs red and green are switched on. Within
40 seconds the “Operator Key” must be presented in front of the reader.
If the process is successful the red LED turns off and the green LED flashes
5 times.
If the red LED is on continuously the process failed.
4. Changing the Currency
The key fob reader is delivered for USD as standard currency. In case of
need the currency can be changed. This done with the help of the
“Currency Key” that is provided separately.
On the back of the key fob reader you have to press the push button e.g.
with a paper clip as shown in figure 3.
Once the key is pressed the LEDs red and green are switched on. Within
40 seconds the “Currency Key” must be present in front of the reader. If
the process is successful the red LED turns off and the green LED flashes
5 times.
If the red LED is on continuously the process failed.