Instructions

9
13. Building into a enclosure
Enclosure
To avoid hum, it is recommended to mount the K8084 and the transformer into a Metal housing.
Drill the holes for the connections and the potentiometers.
Hint:You can drill the holes for the knobs or the potentiometers and mount the knob afterwards.
1 hole in the print (next to RV3) is provided to connect the earthing to the housing through the metal spacers
or bolts.
Hint:
Mount the transformer as far away as possible from the circuit to avoid humming.
It is recommended to leave this circuit under voltage; disconnect the voltage only when not in use for a
long time. Always switch off the power amplifier first before switching off the preamplifier.